Description
Digital balance charger for 7.4V and 11.1V Li-Po and Li-Ion airsoft batteries
This balance charger monitors and balances individual cells during the charging process. Balance charging helps prevent uneven cell voltage, which can reduce battery lifespan and affect performance. By equalizing cell voltage, the charger supports safer charging and more consistent battery output.
Specifications:
- Compatible battery types: Li-Po and Li-Ion
- Supported battery configurations: 2S (7.4V) and 3S (11.1V)
- Charging current: 1A
- Power: 15W
- Dimensions: 66 × 42 × 21 mm
Operation Instructions:
1. Connect a compatible Li-Po or Li-Ion battery to the charger, ensuring correct polarity.
2. Charging will begin automatically once the battery is connected.
3. The LCD display shows battery voltage and charging status during operation.
Warning:
- Never attempt to charge more than one battery at a time.
- Never leave the charger unattended while in use.
- Stop charging immediately if any malfunction is observed.
- Keep the charger away from dust, moisture, heat, direct sunlight, and vibration.
- Do not place the charger on car seats, carpets, or similar surfaces.
- Always place the charger on a heat-resistant, non-flammable, non-conductive surface.
- Do not charge the following battery types:
- Lead-acid or VRLA batteries
- NiMH or NiCd batteries
- Non-rechargeable batteries
- Damaged or faulty batteries
- Batteries made from mixed cell types or different brands
⚠️ Airsoft Battery Safety: Always review our Airsoft Battery Safety Guide before charging Li-Po or Li-Ion batteries.
Key Battery Charging Safety Guidelines:
- Only use this charger with compatible Li-Po or Li-Ion batteries.
- Verify battery voltage and cell count before charging.
- Charge at the correct current (1C rate unless otherwise specified by the battery manufacturer).
- Never leave batteries unattended while charging.
- Always charge in a LiPo-safe bag on a non-flammable surface.
- Allow batteries to cool to room temperature before charging.
- Inspect batteries for damage before each charge.
- Do not charge batteries discharged below 3.3V per cell.
