Description
Ninja LPR V2 Regulator for PolarStar & Wolverine HPA Systems
Ninja, long known in the paintball industry for making high-quality HPA regulators, were asked by Airsofters for a more efficient, more maintainable and cost effective solution for their HPA setups. They came out with the Ninja LPR.
The Ninja LPR V2 you can use any air system with a 500 PSI MAX output to power the LPR. Keep in mind all Ninja HPA regulators are adjustable to the 500 psi low pressure setting, so you can use any Ninja HPA air tank and regulator with the LPR V2.
The Ninja LPR V2 uses a single dynamic o-ring design to keep you on the field longer. The system can be fully rebuilt in a mater of seconds. The direct acting regulation means extremely fast recharge rates for consistent shot-to-shot velocity, even up to 25 RPS.
Features:
- Aluminum sand-blasted matte black finish
- Max 500 psi inlet pressure
- 0-160 psi pressure adjustment range
- Can be tournament locked with a ziptie and included cap
- Threaded piston with 1/2-20 female thread for ease of maintenance
- Maintenance kit included
- Made in USA
- Maintenance kit included
